|
|
| Products>
Spray Drying |
 |
Principle of Operation
Diagram of the Drying Air
| • |
Air Intake |
| • |
Heater |
| • |
Air Distributor |
| • |
Cyclone (product is separated
from the air stream) |
| • |
Aspirator |
| • |
Temperature sensor, air outlet
|
| • |
Collect Pot |
|
|
|
Diagram of the product flow and spray nozzle
| • |
Feed solution, emultion or dispersion |
| • |
Peristaltic feed pump |
| • |
Product Spray |
| • |
Connector for atomization air
or gas |
| • |
Connector for cooling water |
| • |
Nozzle needle to clear the nozzle's
opening when clogging occurs |
|
|
Controls
| • |
Aspirator control in steps 1%
Range 0 to 118Nm3/hr |
| • |
Inlet temp. control in steps
of 0.1 0c
Range 0 to 3000c |
| • |
Feed flow control in steps of
1%
Range 0 to 1500 ml/water per/hr |
|
|
|
|
