HIGH SHEAR GRANULATOR OF CONICAL MIXING BOWL

    HIGH SHEAR GRANULATOR OF CONICAL MIXING BOWL
    15th January 2017

  • A high shear granulator consists of a cylindrical or conical mixing bowl, A three bladed impulsor, a chopper, an auxiliary chopper, a motor to drive the blades and a discharge pot. By either circulating hot or cool liquid or steam through the jacket, the mixing bowl is jacketed for heating or cooling the contents of the bowl as the case may be.
  • The impulsor which is employed in mixing of the dry powder and patentibus of the granulating fluid in high shear granulator, normally rotates at a speed ranging from 100rpm to 500rpm. The chopper forms part of high shear granulator and is used to break down the wet lump to produce granules.
  • The chopper rotates at a speed of 1000 to 3000rpm. Powder densification and/or agglomeration are by the in cooperation of a granulation fluid into the powder with high-power-per-unit mass, through rotating high-shear forces.


For any enquiries regarding our powder processing equipment and technologies for the chemicals industry, please get in touch today.


Request a Quote

expertise-in-challenging-api-applications

EXPERTISE IN CHALLENGING API APPLICATIONS

API (Active Pharmaceutical Ingredients) manufacturing requires that special attention be paid to processing equipment design, hygiene and safety.

umang-pharmatech-laboratory-equipments

Umang Pharmatech® LABORATORY EQUIPMENTS

Pellet processing is accomplished with several of our products, including the Axial, cone, Radial, Die roller, mixer cum extruder, basket models.

the-industry-leader-in-comminuting

THE INDUSTRY LEADER IN COMMINUTING

Umang Pharmatech® advanced pellet technology and superior engineering provide unparalleled processing efficiency exceptional product quality

Put-your-full-Scale-Production-to-the-test

PUT YOUR FULL-SCALE PRODUCTION TO THE TEST

Successfully scaling up to full production means replicating your pilot results. How do you do this? The key is to use lab milling equipment that exactly

achieve-accurate-partical-sizing

ACHIEVE ACCURATE PARTICLE SIZING

Particle size is a critical parameter in material properties. Monitoring and measurement of grain size distribution during processing is critical to successful product.



Combined-Extruder-Spheronization

COMBINED EXTRUDER SPHERONIZATION

A Fully integrated Continuous drug pelletization system consisting Extruder (Axial | Cone | Dome | Radial | Die Roller | Basket extruder etc.) with twin bucket weight assembly

Solid-Drug-Layering

SOLID DRUG LAYERING 900 / 1100 / 1300MM

The operation is carried out using a Drug layering rotating plate, Dry powder dusted on nonpareils adheres, increasing their size and forming larger pellets. As per requirements.

Continuous-Vibratory-Dryer

CONTINUOUS VIBRATORY DRYER

Continuous Tray Dryer Designed for continuous & rapid drying process. Tray Drying is certainly one of the most energy-intensive operations in industries, and as most dryers operate

Mini-Lab-Bottom-Top-Spray

MINI LAB BOTTOM / TOP SPRAY

Mini - Lab is a table-top fluid bed for laboratory use, sized for product volumes from 100 ml to 700ml. It is ideal for handling fine powders, pellets, granules, crystals and also tablets.

Hot-Melt-Extruder

HOT MELT EXTRUDER

Hot Melt Extrusion is the upgraded version of Twin screw Extruder with heating as an element, the whole process involves hopper for feeding the raw material